International Journal of Metallurgy and Metal Physics

ISSN: 2631-5076 Impact Factor = 0.52* DOI: 10.35840/2631-5076

Editorial Board

Dr. Shijun Zhao

Assistant Professor
Department of Mechanical Engineering
City University of Hong Kong
China

Dr. Shijun Zhao is an Assistant Professor in Department of Mechanical Engineering at City University of Hong Kong. Dr. Zhao received his Bachelor’s degree in Physics in 2008 and his Ph.D. degree in Nuclear Engineering in 2013, both from Peking University. His Ph.D. research centered on the radiation effects in ceramics and low-dimensional materials based on ab initio methods and molecular dynamics simulations. After graduation, Dr. Zhao conducted his postdoctoral research at the College of Engineering at Peking University for two years, with a focus on excited electron dynamics in materials under high-energy ion or laser irradiation using ab initio methods. Prior to joining City University of Hong Kong in 2018, he was a postdoctoral research associate at Oak Ridge National Laboratory, working on the irradiation effects in concentrated solid-solution alloys. Dr. Shijun Zhao’s research interest includes Computational materials science, Defect properties, Nuclear materials, Energy storage materials.

Prof. Scott X Mao

Professor
Department of Mechanical Engineering and Materials Science
University of Pittsburgh
USA

Dr. Scott X Mao is a Professor at University of Pittsburgh in the Department of Mechanical Engineering and Materials Science. He received his Post Doc. In Materials Science at MIT in 1989, Ph.D. in Mechanical Engineering (Materials Science) at Tohoku University in 1988, M.Sc. in Mechanical Engineering at Tohoku University in 1985 and B.Sc. in Mechanical Engineering at Beijing University of Aeronautics, China in 1982. His honours and awards include Chancellor’s Distinguished Research Award in 2006, William Kepler Whiteford Professor in 2005, TMS-SMD service Award in 2002, Leighton E. & Mary N. Orr Faculty Fellow in 1999, UC Faculty Research Excellence Award in 1997 and Department Research Excellence Award in 1997. Dr. Scott X Mao’s research interest includes Deformation physics of materials, In-situ transmission electron microscopy, Phase transformation, Nanocrystalline materials, Metallic glass, Energy materials, Lithium ion battery materials, Fracture mechanics.

Prof. K Linga Murty

Professor
Department of Materials Science and Engineering
North Carolina State University
USA

Prof. K Linga Murty is a Professor at North Carolina State University in the Department of Materials Science and Engineering. He received his B.Sc. and M.Sc. [Physics] Andhra University, India and M.S. in 1967, Ph.D in 1970 in the department of Materials Science & Eng at Cornell University, Ithaca, NY. His honors and awards include Alcoa Foundation Research Achievement Award for Outstanding Research during 1986-88 6/1993: ANS Mishima Award for outstanding contributions in nuclear materials and fuels R&D 10/1996: ASM-International Fellow 11/1996: Life Fellow of IIM 3/1997: Best Paper Award for paper, Non-destructive Measurement of Key Mechanical Properties in Welded Components using a Novel Stress-Strain Microprobe System, 14th WCNDT, Dec. 96 11/2002: Fellow, American Nuclear Society 11/2015: Author of around 351 technical papers; a text book on Introduction to nuclear materials and editor & author of 2 Chapters, ‘Materials ageing and degradation in light water reactors by Woodhead Publishers, 2012.

Prof. Mohamed A Barakat

Professor
Department of Environmental sciences
King Abdulaziz University
Saudi Arabia

Dr. Mohamed A Barakat is a Professor in Department of Environmental sciences at King Abdulaziz University, Saudi Arabia. He has completed his PhD at the age of 30 years from Cairo University, Egypt, and postdoctoral studies from University of Delaware, USA. Dr. Mohamed A Barakat was highly qualified in the field of Industrial Waste Management and Pollution Control, besides Catalysis and Nanotechnology. His experience includes academic research and teaching works in Japan, Germany, the United States, and Saudi Arabia, as well as initiating and leading industrial research projects in Egypt, and jointly with the United states of America. He has published more than 100 papers in reputed journals and has been serving as an editorial board member of repute. His honors and awards include Award of the Environmental Researches, Academy of Scientific Research and Technology, Egypt in 2013, Prize of excellence in Scientific Publications, KAU, Saudi Arabia in 2013 and Prize of excellence in Scientific Publications, KAU, Saudi Arabia in 2012, etc. His research interest includes Nanomaterials for environmental applications including photocatalytic degradation of organic pollutants in industrial wastewater, New and modified adsorbents for removal of pollutants in wastewater, Phytoremediation of heavy metals in soil and water, Recovery of metal values from industrial solid wastes, etc.

Dr. Yong-Cheng Lin

Professor
School of Mechanical and Electrical Engineering
Central South University
China

Dr. Yong-Cheng Lin is a Professor in School of Mechanical and Electrical Engineering at Central South University. He received Ph.D. degree from Tianjin University in 2006. He is a Youth Science and Technology Innovation Leader of Chinese Ministry of Science and Technology, Young Chang Jiang Scholar of Chinese Ministry of Education, Science and Technology Leader in Hunan Province, etc. He has finished over 20 research programs supported by China or local government. His research interests include experimental, theoretical and simulation research on the hot deformation processing-structure-property relationship of alloys, as well as the application of intelligent manufacturing. Also, Yong-Cheng Lin gained more than 34 Chinese patents and received 4 science and technology awards from Hunan Province, China. He was awarded as “Most Cited Chinese Researchers” in 2015, 2016, 2017 and 2018.

Prof. Ying Ruan

Professor
School of Physical Science and Technology
Northwestern Polytechnical University
China

Dr. Ying Ruan is a Professor in School of Physical Science and Technology at Northwestern Polytechnical University (NPU), vice dean of Key laboratory of Hypernormal Materials Physics and Chemistry (Ministry of Education), vice dean of Key Laboratory of Space Materials Science and Technology in Shaanxi province, vice director of Space Materials Science and Technology Branch of CMRS and vice secretary general of Porous Materials Branch of CMRS. She received her Ph.D degree from NPU. She went to Department of Materials Science and Engineering of MIT as a visiting scientist in 2012. She is expert at rapid solidification of metallic materials with their applied performances under space simulated conditions. Dr. Ying Ruan research interests includes Rapid solidification and undercooling, Containerless processing, Microstructure and physical properties.

Prof. Zhang Meijie

Professor
School of Materials and Metallurgy
University of Science and Technology
China

Dr. Zhang Meijie is a Professor in School of Materials and Metallurgy at University of Science and Technology. She received her Ph.D, M.Sc, B.Sc. degrees from Wuhan University of Science and Technology. Her Honors and awards are Key technology for refractory reparation of the huge scale furnace linings, the 2nd Class Prize in science and technolog y Hubei province P.R. China, 2016; and Design, preparation and service behavior of low thermal conductivity furnace linings at high temperature, the First Class Prize in science and technology, Hubei province P.R. China, 2015. Dr. Zhang Meijie research areas includes 1. Assessment and prediction the damage of refractory based on the modelling and experiment of erosion and corrosion; Preparation and properties of capsulated phase change materials based on the modelling and experiment.

Prof. Chong-gui Li

Professor
School of Materials Engineering
Shanghai University of Engineering Science
China

Dr. Chong-gui Li is a Professor in School of Materials Engineering at Shanghai University of Engineering Science, China. He received his Ph.D, M.Sc, B.Sc. degrees from Harbin Institute of Technology, China. His Honors and Awards include: Best Paper Award (2018, Provincial Conference on Laser Technology), Second Prize of Teaching Achievement Award of SUES (2017), Best Paper Award (2016, National Conference on Heat Treatment), First Eagle Wing Scholar of SUES (2015), First Professional Ethics Award of SUES (2015) and many more. Dr. Chong-gui Li research areas includes Additive manufacturing, Nano Surface Engineering, Laser Surface Modification and Coating Technologies.

Prof. Xiao-Ping Wei

Professor
The school of Mathematics and physics
Lanzhou Jiaotong University
China

Prof. Xiao-Ping Wei is a Professor at Lanzhou Jiaotong University in The school of Mathematics and physics. He received his B.S. in Department of Physics at Lanzhou Jiaotong University, China from 2004-2008, Docter in Department of Physics at Tianshui Normal University from 2008-2013, Post Doc. In Collage of Civil Engineering and Mechanics at Lanzhou University from 2014-2020. Dr. Xiao-Ping Wei’s research interest includes First-princ view full biography...

Prof. S Ramesh

Senior Professor
Faculty of Engineering
University of Malaya
Malaysia

Prof. S Ramesh is a Senior Professor in Mechanical and Materials Engineering at University of Malaya. He received his PhD in Advanced Materials (1997) and Bachelor of Mechanical Engineering (Hons) - First Class (1994), both from the University of Sunderland, UK. He has received many accolades as a distinguished professor and have a strong track record in administration, teaching and research. He is a Fellow of the Academy of Sciences Malaysia, Fellow of the Institution of Mechanical Engineers UK and Fellow of the Institution of Engineers Australia. Dr.Ramesh’s research interest includes Development of specialty ceramics and composites for mechanical and biomedical applications, Laser welding of metal alloys, Powder metallurgy, Mechanical behavior of materials, Materials characterization, Corrosion of materials and Failure analysis of engineering materials.

Prof. Zhang Zhongwu

Professor
College of Materials Science and Chemical Engineering
Harbin Engineering University
China

Dr. Zhang Zhongwu is a chair professor (Longjiang Scholar) of Heilongjiang province and the winner of Natural Science Foundation of Heilongjiang province for Distinguished Young Scholars. He joined faculty in the college of materials science and chemical engineering at Harbin Engineering University, Harbin, since June 2013. He has been working in the areas of nanostructured steels and alloys, radiation-tolerant alloys, ultra-light alloys and advanced metallic materials and the application of atom probe tomography and small angle neutron scattering. He is a recipient of numerous “Outstanding Performance” awards from either academic societies or government. Dr. Zhang is the director of institute for advanced metallic materials at Harbin Engineering University. Dr. Zhang Zhongwu's research interests includes Investigate the structure-property relationship; Characterize the structure and property, specifically the thermodynamic and kinetic of nanocluster precipitation and strengthening mechanism of nano-structured materials; Recrystallization of metals and alloys, specifically dynamic and kinetic of grain boundary migration during directional annealing, grain boundary character distribution and texture control; High temperature, high performance and radiation-resistant materials; Radiation effects; Corrosion; Superlight alloys; 3D atom probe tomography and Neutron/X-ray scattering.

Prof. Yun Luo

Associate Professor
College of New Energy
China University of Petroleum
China

Dr. Yun Luo is a Adjunct Professor in China University of Petroleum, China. He received his BEng. in Process equipment and control engineering at China University of Petroleum (East China) in 2013, MSc in Power engineering and Engineering Thermophysics at China University of Petroleum (East China) in 2015, Ph.D. in Power engineering and Engineering Thermophysics at China University of Petroleum (East China) in 2018. Dr. Yun Luo’s res view full biography...

Prof. Ebrahim Ali Mahmoud Mahdy

Associate Professor
Department of Glass Research
National Research Center
Egypt

Dr. Ebrahim Ali Mahmoud Mahdy is a Associate Professor in Department of Glass Research at National Research Center, Egypt. He received his B.Sc. in Chemistry & Geology from El Menofia University, Egypt in 1997, M.Sc. in Chemistry from El Menofia University, Egypt in 2006 and Ph.D. degree in Chemistry from Ain Shams University, Egypt in 2009. Dr. Ebrahim Ali Mahmoud Mahdy Research Interests includes Material Science for: Glass materials, view full biography...

Prof. Oleksandr Trudonoshyn

Assistant Professor
Department of Materials Science and Design Basics
Vyatskiy State University
Russia

Dr. Oleksandr Trudonoshyn is a Assistant Professor in Department of Materials Science and Design Basics at Vyatskiy State University. He received his Bachelor degree in General metallurgy from Igor Sikorsky Kyiv Polytechnic Institute, Ukraine in 2010 and 2011, Master degree in Special metallurgy from Igor Sikorsky Kyiv Polytechnic Institute in 2012 and Ph.D. degree in Materials science from Friedrich-Alexander Universität Erlangen in 2019. Dr. Oleksandr Trudonoshyn's research interests include Alloy design, lightweight alloys, metal-matrix composites, precipitation strengthening, microstructure evaluation, internal friction and damping properties, conventional mechanical properties, melting and casting processes, solidification behavior and phase transformations.

Prof. Di Zhang

Professor
Department of Materials Science and Engineering
Shanghai Jiao Tong University (SJTU)
China

Dr. Di Zhang is a professor in Materials Science and Engineering at Shanghai Jiao Tong University (SJTU), China and also the director of State Key Lab of Metal Matrix Composites and Institute of Composite Materials at SJTU and Professor of Chang Jiang Scholars Program. Dr. Zhang received his PhD from Osaka University, Japan. His research interests include process of advanced metal matrix composites and the basic and applied research on biomimetic morphology-genetic materials. Dr. Zhang works on bioinspired functional materials, which has been widely reported by many famous scientific media (e.g., "Discovery Channel News") in the world. The as-developed metal matrix composites has been supplied to Chinese aerospace and defense systems and successfully deployed therein. Research Interests 1. Process of advanced metal matrix composites. 2. Basic and applied research on biomimetic and morphology-genetic materials.

Prof. Hongze Wang

Associate professor
School of Materials Science and Engineering
Shanghai Jiao Tong University
China

Dr. Hongze Wang is a Associate professor in School of Materials Science and Engineering at Shanghai Jiao Tong University. He received his B. A. in Material Science & Engineering at Huazhong University of science & technology, China in 2011 and Ph.D. degree in Mechanical Engineering from Shanghai Jiao Tong University in 2016. His honors and awards are Meritorious Winner for Mathematical Contest in Modeling for American students in 2010, National Scholarship for undergraduate student (Chinese Ministry of Education, Awarded to Top 1 students) in 2010, Member of the Champion team for CCTV robot competition for undergraduate student Ranked 1/60 in 2011, National Scholarship for Ph. D. student(Chinese Ministry of Education, Awarded to Top 1% students) in 2015 and Excellent Doctor thesis in Shanghai Jiao Tong University (Top 1% students) in 2016. Dr. Hongze Wang's research interests include Additive manufacturing /Laser welding, Cut edge experiment s (e.g., X ray, high speed camera) for keyhole dynamics, Laser p rocess ing s imulation, Interaction between laser and material.

Prof. Zhiwu Han

Professor
Jilin University
China

Dr. Zhiwu Ha is a professor in School of Biological and Agricultural Engineering at Jilin University and also Director of the Key Laboratory of Bionics Engineering (Ministry of Education). He was born in Jilin province (P. R. China) in 1969. Dr. Ha obtained his Ph.D. degree in Mechanical Enginnering from Yanshan University in 1998. Now, he has been selected as distinguished professor of "Chang Jiang Scholars Program". Dr. Ha is also the winner of The National Science Fund for Distinguished Young Scholars. Research interests: Biomimetics and simulation, functional surface biomimetics, biomimetics sensoring, bionic technologies in metallurgy and metal physics, biotechnology and bionic technology applied in engineering, etc.

Prof. Chao Yang

Professor
South China University of Technology
China

Dr. Chao Yang is a Professor in National Engineering Research Center of Near-net-shape forming for Metallic Materials at South China University of Technology. He received his Ph.D. degree in Material Science from Metastable Materials Science and Technology State Key Laboratory of Yanshan University. Dr. Yang is Associate dean of Key laboratory of Near-net-shape Forming for Metallic Materials Supported by Ministry of Education of the PRC, the Fellow of the Program for NCET in University Supported by Ministry of Education of the PRC (2011) and also the Fellow of the Program for Excellent Talents in Higher University of Guangdong Province. Dr. Yang received 4 ministry and provincial awards. Research Interests: Non-ferrous metal materials, Titanium alloys, Aluminum alloy, Metal matrix composites, Microstructure and property, Powder Metallurgy, Sintering, Casting

Prof. Hebert Roberto da Silva

Adjunct Professor
Department of Mechanical Engineering
Federal University of Uberlandia
Brazil

Prof. Hebert Roberto da Silva is a Adjunct Professor in Department of Mechanical Engineering at Federal University of Uberlandia. He received his Master´s in Mechanical Engineering from Federal University of Uberlandia, Brazil in 2010 and Ph.D. degree in Mechanical Engineering from Federal University of Uberlandia in 2014. Specialist in Ergonomics, SENAC, 2018. Item Elaborator of the National Bank of Items (BNI) of ENADE trained by INE view full biography...

Dr. Daryoosh Vashaee

Associate Professor
Electrical & Computer Engineering Department
North Carolina State
USA

Dr. Daryoosh Vashaee is an Associate Professor at North Carolina State University Electrical & Computer Engineering Department with a courtesy appointment at Materials Science & Engineering Department. He received his Ph.D. working under the supervision of Dr. Ali Shakouri at University of California at Santa Cruz in 2004, worked at MIT as a postdoctoral scholar under the supervision of Drs. Mildred Dresselhaus and Gang Chen, and worked at Oklahoma State University as Assistant Professor in 2008-2013. In the past, he has contributed to the development of several key thermoelectric structures including heterostructure thermionic devices and bulk nanocomposite thermoelectric materials. He is the director of the Nanoscience and Quantum Engineering Research group at NC State University and leads the thermoelectric materials research in ASSIST, an NSF Engineering Research Center which is working on the development of self-powered wearable health and environmental monitoring and advising systems. Dr. Daryoosh Vashaee’s is an expert in the quantum and nanostructured materials for energy conversion and information technologies.

Dr. Mingfang Qian

Associate Professor
School of Materials Science and Engineering
HIT
China

Dr. Mingfang Qian is a Associate Professor in School of Materials Science and Engineering at Harbin Institute of Technology, China. She received her Ph.D, M.S, B.S. degrees from School of Materials Science and Engineering, Harbin Institute of Technology, China. Dr. Mingfang Qian research areas includes: Multifunctional properties, such as magnetocaloric effect (MCE), elastocaloric effect (eCE), magnetic shape memory effect (MSME), magnetic field induced strain (MFIS) as well as the thermal induced shape memory effect (SME) and superelasticity (SE), of multi-dimensional (multi-scale) Ni-Mn-based alloys, with emphasize on the synthesis, processing and properties of Ni-Mn-based foams and microwires; and Applied technologies of the Aluminum based composites.

Dr. Raja Rizwan Hussain

Associate Professor
Civil Engineering Department
King Saud University
Saudi Arabia

Dr. Raja Rizwan Hussain is an Associate Professor in Civil Engineering Department at King Saud University, Saudi Arabia. He received his Ph.D. and M.Sc. in 2006 and 2008 in Civil Engineering from the University of Tokyo, Japan which is ranked among Top 20 universities in the world. Dr. Hussain was ranked as outstanding student and was awarded the best research thesis, prize and medal from the University of Tokyo. He also completed his Ph.D in a record short period of just two years. Dr. Hussain has received more than 75 medals, awards, prizes and distinctions throughout his research, academic and professional career. He is an active member of more than two dozen international societies, organizations, councils & committees. His research areas of interest lie in steel reinforced concrete technology - materials &structures, especially corrosion.